|
Overhead conveyors are used to transport fabric, bundles, semi finished and finished garments in factories. Typical garment conveyors are pneumatic, expensive and consume large volumes of air which is very energy inefficient. Oil blowout stains on garments are common when faulty pneumatics are used on the garment line.
Our garment conveyor solution addresses all the above issues and the benefits are as follows:
Remote control button with operator - uses no wires - to control movement of garment to next station.
Electric motor drives the garment / bundle to next station.
Queing system sensing to prevent overloading of any station.
No energy consumption when conveyor is not moving.
Total energy consumed by a pair of conveyors [two conveyors] for the full day is less than one unit.
Error indication for overload and jammed feed line.
Easy to install - less than one day for a line.
Totally self contained unit - needs just one power line for operation. Can be made to work on a UPS also!!
Remote control battery lasts up to 1 year of continuous usage.
Make your own converyor tubing and mechanicals and use our automatic motorized system for controls.
We help with the mechanical design of the conveyor to enable you to make your own - very low costing.
First in the industry with remote control motorized system.
One system controls TWO conveyors.
System Contents
Two RF remote Controls
One conveyor RF receiver unit with logic controls for two stations.
Two motors
Two proximity sensors
Two limit switches
Pulley system with hook attachment for moving garment to next station.
Profit from our products and designs
|
