|
Features for RF Remote Car Alarm
Central locking and unlocking for all doors using remote
Keeloq technology from Microchip for unique code hopping remote output.
Keeloq technique prevents code grabbing with no two codes ever being repeated.
Unique LEARN facility with Keeloq allows up to seven remote controls.
Unique ERASE facility with Keeloq allows erasure of lost remote controls.
Remote boot opening output [Needs external RELAY].
Remote disabling of vibration detector to prevent nuisance alarms.
Flasher output
Siren output
Ignition disable output
Door input
Ignition ON sensing input
Courtsey [Interior] light sensing input
Selectable Exit delay by jumper - 3 sec or 12 sec.
Remote control LEARN selection jumper.
Door actuator position sensing for open or close.
Remote operation
Big button [Left button] - Arm / Disarm toggle.
Small button [Right button]
In armed mode [When status LED is blinking] - Disable vibration mode
In disarmed mode - Open boot
BOTH buttons together - PANIC
To disarm the alarm during normal operation [When alarm is not sounding] press the left button to toggle between arm and disarm.
To disarm the alarm during alarm sounding mode press any button to silence the alarm.
When the alarm is armed, the right button will deactivate the vibration sensor.
When the alarm is disarmed, the right button will open the trunk [boot].
In any more, press both buttons to sound the siren and light the flashers - Panic or Search mode operaton.
Note:Door Locking actuators, plastic housing, etc., are not available in this kit.
|
