Network Clock

  • Print
Details
Category: Net Clock
Published on Monday, 07 November 2011 06:19
Written by Rachana
Hits: 218

Network Clock

bgvjkxfd


Features:

  1. Computer synchronized time via RS485 interface
  2. Up to 16 clocks addressable
  3. Large 9” RED LED display of time in 24 Hr format.
  4. Temperature indicator for room temperature
  5. Large 4” Red LED display of temperature in *C format
  6. Schedule setting for audio music output via two speakers.
  7. Audio output volume control on panel.
  8. Shift and Cell number display during audio output.
  9. Windows control software interface on PC.

Installation:

The network clock may be installed in a suitably elevated location for easy readability and visibility on the factory floor.The clock is provided with two hooks on the exterior and may be suspended with a chain. 

 

Connections:

  1. Connect the RS485 input from the master clock or computer output
  2. Connect the RS485 output to the next clock in the ring or leave it unconnected.
  3. Connect both speakers on the left and right to the horn speakers provided.
  4. Connect the temperature sensor to the input receptacle.
  5. Connect AC230V to the unit.
  6. Power up the unit and ensure that the time is being shown on the clock.
  7. During the schedule alarm time, the audio output will be audible.  Adjust the speaker volume to suit.

GHFYTTRY

Software installation:

The software – Network Clock is provided on a CD.  Please insert the CD into the computer system connected to the Time and Attendance Management System to ensure synchronization with both the Network Clock and the Attendance system.  If two different computers are used, the time will not be synchronized with the time and attendance system. 

From the file menu – Run SETUP from the CD.  The software will install automatically into the Network Clock folder in the Program Files directory of the Windows operating system.